You just need to have WDS installed, ConfigMgr will configure it for you as far as setting up PXE, nothing else is needed in regards to WDS

So depending on network, wherever you need to PXE boot, then you'll need a server with WDS, or however you want that network structure setup

Thanks

Chris Nackers

From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Johnson, Brett C.
Sent: Wednesday, December 30, 2009 10:27 AM
To: mssms@lists.myITforum.com
Subject: [mssms] MDT and SCCM 2007 R2 SP2

I’m going through the process of integrating MDT and WDS with SCCM 2007 R2 SP2. First question I guess should be if its best practice to install WDS on a Central Site Server? Everything I looked at basically shows the process but I was wondering if there is a better way. Also, If I complete this install on my Central Server do I also need to install MDT and WDS on my Secondary Servers? My primary objective is to be able to capture and push an image through SCCM without needing any other interface. If you have any ideas please let me know.

Thanks,

Brett

==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/

==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/