From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Todd Hemsell
Sent: Wednesday, January 14, 2009 10:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] SCCM OSD: Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
Open the ts
Go to tht package
Change it to another npackeg
Hiy apply
Change it back to package it should be (original)
Click apply
Click ok
Happens to me all the time. Package updates but TS does not see it is updated and still looks for the older version
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Crown David T. (DNREC)
Sent: Wednesday, January 14, 2009 8:22 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] SCCM OSD: Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
Bump?
According to the ts log its looking for RNR00103:1 but my DP's show as having RNR00103:3.
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Crown David T. (DNREC)
Sent: Tuesday, January 13, 2009 14:59
To: mssms@lists.myitforum.com
Subject: RE: [mssms] SCCM OSD: Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
I'm having this issue after I update my OS image. I can see in the TS log its looking for version 1 of the package, but version 3 is on an unprotected DP.
Has anyone seen this before?
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Gushue, Bill
Sent: Monday, December 08, 2008 10:02
To: 'mssms@lists.myitforum.com'
Subject: RE: [mssms] SCCM OSD: Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
I just had this problem (ie., the fact that no DPs are found, not the SATA controller issue) and it was because I never had the IP subnet in the boundaries list (also be careful if your DP is protected, you will need to add the subnet there also).
Here’s a link with some discussion about this and some possible other issues:
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2586757&SiteID=17
For example, make sure your package has properly been distributed to the DPs.
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Kehl, Reto
Sent: Monday, December 08, 2008 9:40 AM
To: mssms@lists.myitforum.com
Subject: [mssms] SCCM OSD: Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
- OSD installed XP SP2 Image
"Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk.
Check boot path and disk hardware."
The Image was taken from GX620 and applied to OptiPlex 755. I think the problem is missing SATA drivers (though I expect bluescreen 7B then)
I have configured a Driver Package but It seems it could not be found in the "Apply Device Drivers" Task Sequence:
Resolving content for driver "Intel(R) 82801FBM SATA AHCI Controller"
CLibSMSMessageWinHttpTransport::Send: URL: sms-mp.xyz.com:80 CCM_POST /ccm_system/request
The request has succeeded. 200 OK
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 181, uncompressed size 418
Filtering Content Locations.
Found 0 DPs in subnet, 0 DPs in local site, 0 DPs in remote location and 0 Multicast DPs
!lsDPList.empty(), HRESULT=80040102 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2134)
pDriverCatalog->resolveSource( pDriver->getContent(), sSource ), HRESULT=80040102 (e:\nts_sms_fre\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,615
Failed to resolve content for driver "Intel(R) 82801FBM SATA AHCI Controller". Code 0x80040102
Failed to find a suitable device driver for device 'Serial ATA Controller'.
(same results when booting with CD)
I have refreshed Boot Image (x86) and the Operating System Image.
Reto Kehl
Authorised Signatory
Rothschild Bank AG - Zurich
Tel +41 (0)44 384 78 86
Fax +41 (0)44 384 72 16
e-mailreto.kehl@rothschildbank.com
--
This e-mail message and any attachments are of a confidential nature. The information is intended for the named addressee exclusively. If you are not the addressee, you may not electronically disseminate, otherwise distribute or copy this e-mail message, and you may also not use it for any purpose. Please notify the sender immediately if you have received this e-mail message by mistake, and delete this e-mail message and its attachments.
E-mail transmissions could be lost, intercepted, corrupted or destroyed. They could arrive late or incomplete, or could even contain viruses. Confidentiality and reliability of the information so transmitted cannot be guaranteed. Rothschild Bank therefore does not accept any liability or responsibility for errors or omissions regarding the information transmitted through e-mail.
If verification of the information transmitted through e-mail is required, please ask for postal delivery by contacting Rothschild Bank.
This e-mail message is provided for information purposes only. It should not be construed as an offer or solicitation to buy or sell any financial instruments.
==============
Has myITforum.com helped you in some way? Donate to the cause: http://www.myitforum.com/donations/
********************************************************************
This e-mail message is privileged, confidential and subject to
copyright. Any unauthorized use or disclosure is prohibited.
Le contenu du pr'esent courriel est privil'egi'e, confidentiel et
soumis `a des droits d'auteur. Il est interdit de l'utiliser ou
de le divulguer sans autorisation.
********************************************************************
==============
Has myITforum.com helped you in some way? Donate to the cause: http://www.myitforum.com/donations/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
