From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of John.Nelson2@wellsfargo.com
Sent: Monday, January 12, 2009 1:22 PM
To: mssms@lists.myITforum.com
Subject: RE: [mssms] LastScanOpCode, "v_GS_LastSoftwareScan" view
I'll ask around, but if I could ask…why do you need that info? In all my years of doing this I've never had a need to know what's there. I'm just not sure what you would do if you had the information?
John Nelson
Microsoft MVP - System Center Configuration Manager
---------------------------------------------------
Applications Systems Engineer
Software Distribution Engineering - SDE
Wells Fargo, Minneapolis, MN 55401, N9301-L29
612-667-3097 Office - 612-655-4137 Mobile
john.nelson2@wellsfargo.com
This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation.
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Max Erenburg
Sent: Monday, January 12, 2009 11:55 AM
To: mssms@lists.myitforum.com
Subject: RE: [mssms] LastScanOpCode, "v_GS_LastSoftwareScan" view
Thanks for the reply John, (wish you knew)
It is definitely being used, (i.e. incremental, full, has to be others) as there are varies values being stamped (0, 7, 6, 23, etc...). I have to figured this out one day. I want to add this field to SMS reports, with friendly name mapping for each code.
- Max
From: admin@lists.myITforum.com [admin@lists.myITforum.com] On Behalf Of John.Nelson2@wellsfargo.com [John.Nelson2@wellsfargo.com]
Sent: Monday, January 12, 2009 12:30 PM
To: mssms@lists.myITforum.com
Subject: RE: [mssms] LastScanOpCode, "v_GS_LastSoftwareScan" view
I've only ever seen that described by MS as "Unused" or "Reserved for Internal Use"
I have never found out what the op codes mean.
John Nelson
Microsoft MVP - System Center Configuration Manager
---------------------------------------------------
Applications Systems Engineer
Software Distribution Engineering - SDE
Wells Fargo, Minneapolis, MN 55401, N9301-L29
612-667-3097 Office - 612-655-4137 Mobile
john.nelson2@wellsfargo.com
This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation.
From: admin@lists.myITforum.com [mailto:admin@lists.myITforum.com] On Behalf Of Max Erenburg
Sent: Monday, January 12, 2009 11:00 AM
To: mssms@lists.myitforum.com
Subject: [mssms] LastScanOpCode, "v_GS_LastSoftwareScan" view
Does any one have (figured out/mapped) what each code refers to in "LastScanOpCode" under "v_GS_LastSoftwareScan" view?
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/
==============
Missed an email? Check out the list archive:
http://myitforum.com/cs2/blogs/smslist/