Download details: HPC Pack 2008 SP1 Fix for excessively large boot.wim

After installing HPC Pack 2008 Service Pack 1 the "boot.wim" file on the headnode may slowly grow to an excessive size. Apply this update to the headnode to prevent this issue from occuring.
If the "boot.wim" file (in the %CCP_HOME%\data\ directory) has already become large (over 200 megabytes) the following additional steps are necessary:
1) Locate the media, or file share, that you used to capture the deployment image
2) Copy the boot.wim file from the original location, and replace the boot.wim file located in %CCP_HOME%\data\...
3) Open the HPC Cluster Manager
4) On the 'Configuration' tab, select the 'Configure your network' To-do List entry
5) Change your network topology (to something other than what you actually have, such as 'public only') and complete the wizard.
6) Select the 'Configure your network' entry, and set your network topology back to the appropriate selection and complete the wizard.
7) Your boot.wim file will now be repaired. Ensure that you have applied this update so that it does not grow excessively again.

Download details: HPC Pack 2008 SP1 Fix for excessively large boot.wim