Hey,
Just wanted you all to know that I haven’t abandoned this blog, I’ve just been really busy lately working with customers and doing MVP stuff. I’ll be speaking at MMS next week with Kerrie Meyler so hopefully some of you will attend our session and won’t be too hard on us….be gentle, it’s my first time! The session is on High Availability and Disaster Recovery in OpsMgr and is entitled ‘Don’t Flirt with Downtime’.
In addition, I’m going to be publishing content up to the new 1E blog which you can find here: http://www.1e.com/1eBlogs
Take it easy,
Andy
Today is the first class of my new Karate school in Hoboken, NJ. It's called the Hoboken Kyudokan Goju Ryu Karate school.
The class kicks off in about an hour and despite the fact that I have been teaching karate for years, I'm actually really nervous :)
If you want any more information, the website is http://www.hoboken-karate.com
Wish me luck!!
Andy
From Techlog.org.
We are proud to announce the release of Live Maps v3 for Operations Manager 2007. This version opens many new doors to all the data collected by System Center Operations Manager 2007.
Business process availability monitoring or web enabled executive dashboards? Network topologies or live application diagrams? Live Maps v3 in combination with System Center Operations Manager 2007 brings you all that and more!
Key New Features:
Network and application topology maps
Business process maps
Executive dashboards
All maps are dynamic and change-aware
Network-link monitoring on any map
Wizard and template based map creation
Key Enhancements:
Enhanced scalability of the Web and Authoring console
Changed architecture for health state roll-up
Who Should You Do Next?
Request an evaluation or NFR key
Watch the new scenario based training videos
Build some new v3 maps and impress your customers!
If you are interested in a personal demo just send us an email
Hey All,
Finally I got around to compiling this whitepaper which gives advice and recommendations on planning, installing and configuring OpsMgr in enterprise environments.
The document covers some advanced deployment tips such as the use of gateway servers to span WAN links and also covers some often overlooked best practices around High Availability and Business Continuity. This whitepaper has been a long time in the making and consolidates the experience I have gathered over the past year implementing some of the largest and most complex OpsMgr infrastructures to date.
Thanks to Pete Zerger and SystemCenterForum for serving as tech editor and or course hosting the document which can be downloaded HERE.
Andy
The System Center Operations Manager team is excited to announce the availability of the Operations Manager 2007 R2 Beta, which is ready for you to download through Microsoft Connect today!
As announced and demonstrated by Brad Anderson at TechEd EMEA 2008 earlier this month, Operations Manager 2007 R2 will deliver key new capabilities including cross-platform monitoring, service-level tracking, new and updated monitor templates (including process, OLE DB, NT Service, and Unix/Linux log file), and much more! (continue at source)
From the product team:
After a 10 month joint effort between the AD team and the OpsMgr team, we are proud to announce the latest release of the Active Directory Management Pack for Systems Center Operation Manager 2007. This MP has gone through two months of beta in NTDev, MSIT, and TAP Connect. There are 71 TAP customers who downloaded this MP during the beta period. The RTW release of this MP marks a significant milestone not only for our customers but also for us, as evidenced by the successful collaboration between the AD and OpsMgr teams.
Version 6.0.6452.0
This release includes:
- Support for monitoring Windows Server 2008 operating systems on 32-bit and 64-bit servers.
- Improved monitoring of replication, essential services, and time service.
- Multi-forest discovery and improved topology display.
You can find the Active Directory Management Pack in the System Center Operations Manager 2007 Catalog (http://go.microsoft.com/fwlink/?LinkId=82105)
Changes in This Update
Scenario Improvement | Description |
Windows Server 2008 discovery for full Domain Controllers (DC) and Read-Only Domain Controllers (RODC) | Discover the following objects for Windows Server 2008 DC: domains, forests, sites, site links, RODC, Primary Domain Controller (PDC) Emulator, Relative ID (RID) Master and Infrastructure Master and Connection objects. |
Windows Server 2008 replication monitoring – multiple Service Level Agreements (SLA), enhanced workflow, and new essential services (NTFRS, DFSR and NTDS). | Multiple SLA feature is performed by creating a group and adding computers to it, then setting an override for the replication monitoring script that is pre-group. |
Multiple forest topology discovery and views | Active Directory (AD) multiple forests Topology Discovery is a new feature in this management pack that was added to provide feature parity with the Active Directory Management Pack for Operations Manager 2005 with Service Pack 1 (SP1). In both Active Directory management packs for Operations Manager 2005 (SP1) and Operations Manager 2007 (SP1), to discover other forests, a trust relationship is required between the forest hosting the Operations Manager Root Management Server (RMS) and other forests. Forests that have a two-way transitive trust with the RMS forest will be discovered. The following objects will be created and displayed in the Topology views: Forest, Domain, Site, Site Link, and Replication Connection. |
New essential services roll-up models for Windows Server 2008 and Windows Server 2003 | The Essential Service health state roll-up was redesigned in Active Directory Management Pack for Operations Manager 2007 SP1 for two reasons:
To add an Overall Essential Service state as the parent health state for all the Essential Services and to present a correct hierarchical entity relationship for DC Availability, Overall Essential Services, and individual Essential Services.
To accurately reflect the dependencies for four essential services: SysVol, Distributed File System (DFS) , NetLogon, and DCLocator. |
Implement new reports | Domain Changes and Synchronous Access Mode (SAM) Account Changes for Windows Server 2000, Windows Server 2003, and Windows Server 2008. |
Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
mso-bidi-font-size:10.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I know I’m a little
behind but here are the MP’s uploaded over the last month.
Microsoft
Application Virtualization Management Pack for Systems Center Operations Manager
2007
The Microsoft Application Virtualization 4.5 (App-V) Management Pack enables IT
professionals to use Microsoft System Center Operations Manager 2007 to monitor
App-V server systems. The Management Pack is designed to maximize Application
Virtualization Server availability for handling Application Virtualization
Client requests. This component delivers an enterprise-level solution to
proactively monitor Microsoft Application Virtualization 4.5 server systems.
(Chinese (Taiwan), German, French, Italian, Japanese, Korean, Portuguese
(Brazil), Russian, Chinese (PRC), Spanish)
Microsoft
Biztalk Server 2006 Management Pack for Operations Manager 2007
The BizTalk Server Management Pack for Operations Manager provides
comprehensive discovery and monitoring of BizTalk Server components and
applications. In addition to general support for BizTalk Server 2006, BizTalk Server
2006 R2, this management pack provides coverage for new BizTalk Server 2006 R2
features, such as the native EDI runtime and RFID.
Microsoft
Office Communications Server 2007 Management Pack for Operations Manager 2007
The Microsoft Office Communications Server 2007 Management Pack for SCOM 2007
monitors the health of computers running Office Communications Server 2007 on
Windows Server 2003 and alerts IT administrators about critical health
conditions that indicate degraded performance.
Service Level Dashboard Management
Pack for System Center Operations Manager 2007
The Service Level Dashboard Management Pack enables you to accurately measure
and report on end-to-end system availability and performance of business critical
applications. In addition to the .msi containing the management pack, a zip
file containing only the documentation for this management pack is available as
a download.
You've probably seen the
Service Level Dashboard one before but this version has been updated to support
snazzy looking dials in the reports.
Andy
Just a quick note to say that I have today uploaded a new Level 5 video to the BlogCast Repository entitled 'Advanced Management Pack Creation Part 2'. This guide covers creation of monitors and rules using the authoring console and then looks at the objects in more detail in the XML. More in this series are on the way.
The new video can be found here: http://www.blogcastrepository.com/level5/scom/archive/2008/10/08/advanced-management-pack-creation-part-2.aspx
Thanks,
Andy
I've just heard from Jalasoft that they are currently putting the finishing touches to SP2 of Xian Network Manager IO. Information about the new service pack is detailed below but the key point is that the product will be made much more scalable. For those of you who have used Xian IO, you'll know that the only thing that undermines the excellent user interface and brilliant OpsMgr integration is the current scalability limitations. According to the service pack notes, this has now been addressed. Can't wait for a demo copy!!!
Santa Clara, September 11, 2008-- Jalasoft announced today that soon it is going to be releasing service pack 2 for their monitoring solution Xian Network Manager Io for Microsoft System Center Operations Manager 2007. At this moment SP2 is undergoing heavy testing for large environment scalability in their labs. The most important new feature in addition to many smaller performance enhancements is that Xian no longer uses the SDK (root management server) of Operations Manager to forward alerts and performance data. Instead, it now connects directly to any OpsMgr2007 Management Server. Thanks to these enhancements, Xian is now able to send many more counters and alerts to Operations Manager without consuming valuable resources on your root management server. Also Xian can easily be scaled up by adding new management servers. "Customers told us that they do not always want new visible features, they just want something that is stable, fast and scalable. The real power of SP2 is under the hood. Users will experience more than a 400% performance improvement" States Arnold Hagens, Product Marketing Manager at Jalasoft. Aside from the connection with OpsMgr2007, SP2 also runs improved management packs and a more robust SNMP module. All to guarantee a better user experience. In the next days a beta version is going to be available. Anyone who is interested can obtain this version by contacting Jalasoft. The RTM of SP2 is planned for end November 2008.
For more information contact:
Claudia Ricaldez, Claudia.Ricaldez@jalasoft.com, +1 888 402 6717
About Jalasoft
Jalasoft provides advanced systems management solutions for the heterogeneous computing environment. Xian Network Manager Io, in combination with Microsoft System Center Operations Manager or Microsoft System Center Essentials, is designed to proactively monitor and manage critical infrastructure components such as network devices and UNIX servers to increase availability and accelerate problem detection and resolution with the objective of improving the ROI customers realize from their infrastructure.
Press Release
Andy
Later today, my OpsMgr blogcasts on the Blogcast Repository site will be free for all to access so you can take a look and see if you like them.
I'll be adding at least 1 video a month starting this month so please check out the guides here: http://blogcastrepository.com/level5/scom/default.aspx
Enjoy!
Andy
From Techlog.org
This hotfix contains fixes for issues that can occur, either after installation of Operations Manager 2007 SP1 or Essentials 2007 SP1 on Windows Server 2008, or after the operating system in-place upgrade from Windows Server 2003 to Windows Server 2008.
This hotfix should be applied to the following Operations Manager 2007 SP1 roles:
* RMS
* Management Server
* Gateway Server
* Web Console Server
* SCE Server
* Manually installed Agent (This hotfix should be applied directly to manually installed agents. Automatically deployed agents will appear in the Pending Management view to be approved for upgrade after installing this hotfix on the RMS/Management Server/Gateway server roles)
Microsoft System Center Operations Manager 2007 SP1 & System Center Essentials 2007 SP1 Windows Server 2008 Support Hotfix.
From Techlog.org…why type when you can copy and paste J
Microsoft has released several new management packs for Operations Manager 2007:
Windows Key Management Service for System Center OpsMgr 2007
The KMS MP monitors core Key Management Service offered by Windows Server 2008, Windows Server 2003 and Vista.
Exchange Server 2007 MP for SC Ops Mgr 2007
This management pack includes scripts and rules to effectively monitor Exchange 2007 and report on performance, availability, and reliability of its server roles.
Terminal Services MP for OpsMgr 2007
The Terminal Services Management Pack monitors the individual Terminal Services components on Windows Server 2000, 2003 and 2008.
Windows Server Operating System MP for OpsMgr 2007
The Windows Server Operating System Management Pack provides the fundamental monitoring basics for computers running the Windows 2000 Server, Windows Server 2003, and Windows Server 2008 Operating System.
Windows Server 2008 Application Server MP for OpsMgr 2007
The Windows Server 2008 Application Server Management Pack provides fundamental monitoring for the Application Server role of Windows Server 2008 Operating System.
Recently, an excellent post has appeared on the Manageability Team blog detailing Microsoft's support of hosting OpsMgr on virtual machines.
Check it out here: http://blogs.technet.com/smsandmom/archive/2008/07/24/support-policy-for-operations-manager-2007-running-on-hardware-virtualization-software.aspx
This fix is scheduled to hit the Microsoft support site over the next few days. Details below:
System Center Operations 2007 Service Pack 1
Hotfix Release Notes
SystemCenterOperationsManager2007-SP1-KB951979-X86-X64-ENU.MSI
May, 2008
The information in this article applies to:
System Center Operations 2007 Service Pack 1
Note: This patch applies to System Center Operations Manager 2007 SP1 Only
Summary
Following problems have been identified with a number of System Center Operations Manager 2007 SP1 management packs:
Unable to discover CSDVersion on Windows Vista machines
Unable to discover operating system properties on Windows 2000 SP4
Agent HandleCountThreshold monitor does not restart Health service on exchange agent if HandleCountThreshold is exceeded
ACS Collection rule references a wrong EventID
Performance collection raises erroneous alerts for disabled services due to unavailable perf counters
A script bug prevents cluster discovery where Virtual Server Name is a subset of the Physical Server Name.
This hot-fix resolves these issues.
Symptoms
When affected by these issues, a number of System Center Operations Manager 2007 SP1 management packs will be unable to:
Discover operating system properties on Windows 2000 SP4
Discover CSDVersion on Windows Vista machines
Restart Health service when HandleCountThreshold is exceeded
Collect correct ACS event
Discover cluster where Virtual Server Name is a subset of the Physical Server Name
And additionally generates erroneous Alert for Performance Data Source Module when the services are disabled
After applying this fix, these issues should be resolved.
Installation
This hotfix contains four management packs. Install these management packs from an Operations Manager console.
To extract the management pack files contained in this hotfix:
1. Copy the file:
SystemCenterOperationsManager2007-SP1-KB951979-X86-X64-ENU.MSI
To either a local folder or accessible network shared folder.
2. Then run:
SystemCenterOperationsManager2007-SP1-KB951979-X86-X64-ENU.MSI locally on each applicable computer that meets the predefined criteria.
Note: The installation path is typically the following:
Program Files\System Center Hotfix Utility
You can run SystemCenterOperationsManager2007-SP1-KB951979-X86-X64-ENU.MSI from either Windows Explorer or from a command prompt.
For detailed instructions on the tasks described above, see the Knowledge Base article as referenced in the Additional Information section of this document.
This hotfix contains the following updated Management Packs which must be imported into Operations Manager. These management packs are located in the folder noted above.
Microsoft.SystemCenter.2007.mp (Version 6.0.6278.19)
Microsoft.SystemCenter.ACS.Internal.mp (Version 6.0.6278.19)
Microsoft.SystemCenter.Internal.mp (Version 6.0.6278.19)
Microsoft.Mom.BackwardCompatibility.mp (Version 6.0.6278.19)
Additional Information
For additional information about this issue, see KB article KB951979 at <http://support.microsoft.com/>. For additional information and downloads, see <http://www.microsoft.com/mom>.
Release Notes Copyright Information
Information in this document, including URL and other Internet Web site references, is subject to change without notice and is provided for informational purposes only. The entire risk of the use or results of the use of this document remains with the user, and Microsoft Corporation makes no warranties, either express or implied. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document might be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.
Microsoft might have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.
© 1994-2005 Microsoft Corporation. All rights reserved.
Microsoft, MS-DOS, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and/or other countries/regions.
Randy Roffey of Silect asked me to make you all aware of the following Webinar to be held on Wednesday 28th May 2008. Silect are experts on MP management and so this should be a good one.
Enjoy!
Join us for a Webinar on May 28 |
|
|
|
Space is limited.
Reserve your Webinar seat now at:
https://www2.gotomeeting.com/register/355396121 |
|
This presentation will focus on process considerations and how MP Studio features can function as the foundation for a repeatable process.
If you have multiple management packs, multiple management groups and multiple administrators working with Operations Manager, having a well defined process is critical to a successful implementation of Operations Manager 2007. Even with smaller implementations, having a defined process for handling change requests for management packs is critical to avoiding costly downtime and unnecessary errors.
If ITIL and MOF are important to you, if Change Management and Version control are important functions in your organization, if auditing changes in management packs is something you would like to be able to do, then this webcast could be the most important event you attend all year!
All participants who sign up for the presentation will receive a copy of the Implementation Guide v1.0 Quick Reference by email after the presentation. |
| Title: |
| MP Implementation and Lifecycle Management |
|
|
| Date: |
| Wednesday, May 28, 2008 |
|
|
| Time: |
| 11:00 AM - 12:00 PM EDT |
|
|
|
Raymond Chou that is 
Raymond is a fellow OpsMgr MVP hailing from Kuala Lampur, Malaysia. He has setup up a great blog of his experiences with OpsMgr which can be found here: http://mymomexperience.blogspot.com/
Pete Zerger, another brilliant MVP made a comment on the blog and I couldn't have put it better myself:
"Raymond is someone with great insights into the product and the process for whom I have a great deal of respect. Definitely one to bookmark."
Andy
Finally a gadget we can all appreciate J
Some very clever people have written and released a Vista sidebar gadget which enables you to search just the System Center group of products or individual System Center products. The results returned are spot on and include data from TechNet, MSDN, Blogs and KB articles.
My good friend Maarten Goet has written a much more eloquent post about this tool which can be found here: http://www.techlog.org/archive/2008/04/30/system_center_content_search
I have 'borrowed' the download link from him though...thanks Maarten J
System Center Content Search
I am very pleased and excited to announce that I am currently working on a set of OpsMgr Level 5 Guides for the Blogcast Repository. Once completed and published, they will cover advanced aspects of OpsMgr such as deploying a gateway server, configuring RMS clustering and creating your first management pack.
I will update my blog again once they are completed with a link to the videos that you can subscribe to but I'd just like to thank Brian and the team at Blogcast Repository for this opportunity!
I hope you find the guides useful. Please feel free to contact me if you have any other ideas for videos as once I finish the initial set, I'll be taking requests J
Whilst you are waiting for my video's to be completed, check out the site here: http://blogcastrepository.com/level5/
Thanks,
Andy
The excellent OpsMgr Authoring Console, used to assist with creating Management Packs, has now been officially released.
Authoring console is now available
Today, April 25, 2008, 3 hours ago | Jonobie Ford
The System Center Management Pack Authoring Console 2007 has been released to the Web! If you'll be at the Microsoft Management Summit next week, stop by the Authoring Session SO04 - Tools and Best Practices for Authoring Management Packs for Operations Manager 2007 session for additional information.
The web package can be downloaded from these links:
http://download.microsoft.com/download/f/4/3/f438d6a0-290c-42b8-8f9c-c6660f89e1aa/OpsMgr07_x64_AuthConsole.exe
http://download.microsoft.com/download/f/4/3/f438d6a0-290c-42b8-8f9c-c6660f89e1aa/OpsMgr07_x86_AuthConsole.exe
The HP BladeSystem MP has been updated to version 1.6.2.
Version 1.6.2 addresses the following:
Bug Fixes:
Fixed the HP BladeSystem Enclosure Monitor Manager to support the regional and language settings on Windows Operating System.
Fixed the HP BladeSystem Management Pack for Alert Parameter Replacement Failure on Operations Manager 2007 SP1.
Download the updated HP BladeSystem Management Pack, version 1.6.2 here.
Thanks to Stuart Renes for the information.
Andy
Just a quick note to say how much I enjoyed the recent MVP Summit. Once again the OpsMgr product team went all out to make the MVP's feel welcome and once again, they succeeded.
Plus there was the added bonus of seeing some of my fellow MVP's again, some of which feel like family now....you know who you are J
Roll on next year!!
Andy
Updated MP: Exchange 2007 MP for MOM 2005 (08.01.0240.001) – now supports Exchange Server 2007 SP1
Yesterday, April 07, 2008, 3:05:00 PM | CliveEastwood![]()
The Exchange 2007 Management Pack for MOM 2005 has been updated and released to the Web http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=30eebc7c-a35a-41ae-9cd1-2047847fde85 . The MP has been undated to add support for Exchange 2007 Service Pack 1.
Release notes for the Exchange 2007 MP can be viewed here http://www.microsoft.com/downloads/details.aspx?FamilyId=7FAEFFB9-A691-44B0-9364-83DA0E55924B&displaylang=en
What changed:
Renamed some event rules to better reflect their purpose
Improved some report descriptions
Updated for performance counter name changes
Fixed PowerShell issue when one or more necessary parameters are not passed to a cmdlet
Updated many reports to use a 90%-100% scale rather than dynamic scale to gain visual fidelity in that range. Affected reports are as follows:
o ActiveSync Internal Service Availability
o Mailbox Service Availability
o Mailflow Local Service Availability
o Mailflow Remote Service Availability
o Outlook Web Access External Service Availability
o Outlook Web Access Internal Service Availability
o Unified Messaging Local Fax Service Availability
o Unified Messaging Local Voice Service Availability
o Unified Messaging Remote Voice Service Availability
Added/Modified Event Rules:
o Added: Transport message rejection because of lack of disk space
o Added: Transport message rejection because of memory consumption exceeding the configured threshold
o Added: 10 error level event rules for Active Directory directory server Rights Management Server (RMS) in the Bridgehead Agents Messaging Policies health manifest
o Added: 3 error level event rules for the Transport receive connector in the Bridgehead Transport common health manifest
o Modified: Escalated "The STARTTLS certificate will expire soon" from warning to error alert
Removed many miscellaneous outdated event rules
Enabled collection of performance data for reporting in Test-WebServiceConnectivity ScriptResponseRule
Added support for Test-ReplicationHealth cmdlet; removed numerous event rules made redundant by this addition
Added support for Test-POPConnectivity cmdlet execution through the management pack and monitoring service
Added support for Test-IMAPConnectivity cmdlet execution through the management pack and monitoring service
Changed all outdated references from "Bridgehead" to "Hub Transport"
Added 'From' and 'MediaSecured' property support for Test-UMConnectivity for the monitoring service
Added 'LightMode' property support for Test-ActiveSyncConnectivity, Test-WebServicesConnectivity and Test-OWAConnectivity
Added 'LightMode' property support for Test-POPConnectivity and Test-IMAPConnectivity
Updated all reports to use provided client language for localized dates
MP Update: Exchange 2003 Management Pack (6.0.6278.5) for Operations Manager 2007
Yesterday, April 07, 2008, 1:30:09 PM | CliveEastwood![]()
http://www.microsoft.com/downloads/details.aspx?FamilyID=9ff454f4-6d34-4fb9-9e0b-f5b68c6edc4f&DisplayLang=en
The following list contains the issues that are fixed in version 6.0.6278.5 of the Exchange Server 2003 Management Pack for System Center Operations Manager 2007:
· Fixed an issue with Outlook Web Access (OWA) monitoring using custom URLs so that the Management Pack now looks for the CustomUrls registry key instead of the CustomOwaUrls registry key (consistent with previous versions of the Management Pack).
· Fixed an issue with data collection rules for mailbox or public folder size in MB. On monitored servers running Exchange Server 2003 and using Regional and Language Options other than English (United States) an issue can occur where the size of the mailbox or public folder is reported incorrectly, This will also affect the associated reports.
See the updated MP Guide with the Management Pack.
I have heard rumours over the past few hours that since Microsoft's acquisition of Engyro, they are now offering the Engyro connectors to customers who have purchased OpsMgr 2007 for free!
This is really good news although I am still waiting to find out how to obtain these connectors. I'll blog an update as soon as I have one.
Andy
New news today is that OpsMgr 2007 SP1 has been released. By Monday 25th Feb the updated code should be uploaded to the links below:
- Upgrade:
http://www.microsoft.com/downloads/details.aspx?FamilyId=EDE38D83-32D1-46FB-8B6D-78FA1DCB3E85&displaylang=en
- Evaluation: http://www.microsoft.com/downloads/details.aspx?FamilyId=C3B6A44C-A90F-4E7D-B646-957F2A5FFF5F&displaylang=en
Andy
Hey all,
Firstly I would like to say congratulations to Kerrie Meyler who was awarded her first MVP award today. About time J
Also, I would like to thank everyone who contributed to me being awarded again for the 3rd year running. You know who you are and thanks J
Andy
Just a quick message to wish you all a Happy Christmas and a prosperous New Year! Thanks to everyone who has contributed to the MOM/OpsMgr community this year especially my good friends Pete Zerger, Cameron Fuller and Cliff Hobbs and to all the MVP's.
Thanks to the Microsoft OpsMgr Product team (esp, Justin and Omar) for all your help and support.
Here's hoping I'll be lucky enough to be re-awarded the MVP next year so I can continue to be surrounded by such excellent people.
Andy
Hey,
Just ran into an issue that I thought I'd blog about. I was getting an issue with OpsMgr 2007 SP1 where my SDK and config services would not start on the Root Management Server. In the Operations Manager event log I was seeing Event ID 26380 stating that the SDK service was failing due to an unhandled exception. Further down the description there was an 'Access Denied' to a %Program Files%\System Center Operations Manager 2007 subfolder.
Also in the Application log, I was seeing .NET 2.0 errors everytime I tried to restart the Config service.
After checking folder permissions and various other things, I looked on the net and after trawling for about 30 minutes gave up. I finally stumbled on the issue. For some reason, the user accounts had been removed from the local administrator group on the RMS....Doh!
So if you are seeing the same problem, save yourself a lot of time and check the local administrator group on the RMS first.
Andy
The Microsoft Forefront Security for Exchange Management Pack
for Operations Manager 2007 supports the 10.1 version of Microsoft Forefront Security
for Exchange Server with Service Pack 1. The MP supplies critical events and
alerts on virus and worm activity to Operations Manager 2007, and also monitors
the health and availability of these products.
The Management Pack for Forefront Security for Exchange Server 10.0 can be
found here
The Microsoft Configuration Manager 2007 Management Pack for Operations Manager 2007 provides proactive monitoring of your Microsoft System Center Configuration Manager 2007 environment. This management pack includes:
• Detection and monitoring of all Configuration Manager servers and dependent services
• The alert driven state
• The site hierarchy diagram,
• Performance and backlog monitoring and configuration
• Performance and availability reports.
Before you install the Configuration Manager 2007 Management Pack, read the Configuration Manager 2007 User's Guide. The guide includes the instructions you need to correctly deploy, configure and use the management pack.
Feature Bullet Summary:
The System Center Configuration Manager 2007 Management Pack for Operations Manager 2007 provides improved capabilities for Configuration Manager 2007 monitoring, including the following:
• Monitoring the starting and stopping of all Configuration Manager 2007 services, including critical dependent services like Windows Management Instrumentation (WMI), IIS Admin Service, World Wide Web Publishing Service, Windows Deployment Services Server, Trivial FTP Daemon, Background Intelligent Transfer Service (BITS) and Microsoft SQL Server™.
• Alerting the Configuration Manager 2007 administrator to critical Configuration Manager 2007 status messages.
• Monitoring backlogs of discovery data records (DDRs), software inventory, hardware inventory, status messages, state messages, and software metering on both primary site servers and management points.
• Monitoring outbox backlogs on site systems.
• Monitoring a component and site system role health.
• Monitoring collection evaluation, state message summarization, and site maintenance tasks, including site backup.
• Monitoring SMS Executive crash dumps.
• Monitoring general CPU, Memory, and Disk system resource usage.
• Monitoring processing rates.
• Monitoring the performance trends of many Configuration Manager performance counters by using views and reports.
• Product knowledge content for all alerts and processing rules.
• Detecting all Configuration Manager 2007 computers, classes, and computer groups.
• Configuration Manager 2007 views.
• Reports displaying performance, availability, and configuration of Configuration Manager 2007 server groups. These linked reports leverage the enhanced reporting of Systems Center Operations Manager 2007 for performance, configuration, and availability trends.
• Tasks for executing Configuration Manager 2007 Administrator console applications.
• Computer State view containing the health of all Configuration Manager 2007 server roles and the Configuration Manager 2007 Client.
• Site Hierarchy and Site State views for displaying the health of sites in a hierarchy and the hierarchy itself.
• Service Discovery of important Configuration Manager 2007 server and Configuration Manager 2007 client information.
• Topology diagram of the Configuration Manager 2007 site hierarchy.
• Configuration Manager 2007 configurable alerting on distributed program execution failure through Configuration Manager 2007 program properties.
The following Management Packs have recently been updated:
Operations Manager 2007
More Posts
Next page »